Steps in Effective Foundation Repair in Dallas, TX for Your Property

Share Button

How Foundation Repair is done

There are a lot of cases wherein foundation repair in Dallas TX is required to keep the structural integrity of a building strong. Through the years, there could be a partial collapse to your property which can be caused by earthquake, water intrusion, overloading a structural slab or deck and failure of the foundation caused by improper installation. In order to avoid further damage, foundation repair in Dallas, TX should be done immediately.

Foundation Repair ServicesUsually, there are some signs or indications that are being pointed to a problem with the foundation of your property. Signs will include cracks in the plaster, sagging roof line or the property is being unstable under certain loads. When not prevented, the structure will be red-tagged and you will be forced to leave until the property is inspected and declared safe.

After the inspection is being done and repair has been planned, a contractor will be employed to repair the property. The repair will start by excavation to expose the damaged sections of the foundation. However, it is crucial to keep in a safe place all of your home decoration. Depending on the extent of the repairs, there may be a need for shoring in order to support one or many sections of the building while the foundation repair is being done.

The usual foundation repair in Dallas, TX will have to include embed rebar dowels which are installed to the adjacent and undamaged concrete with the use of a commercial, two-part epoxy. Also, the type of the concrete foundation that is in place will determine if it is needed to cut the adjacent concrete slab to remove the damaged section of the foundation.

The next step of foundation repair in Dallas, TX will be the installation of forms for the new section of the foundation as well as the installation of the steel rebar in the footing section. After the inspection of the forms and rebar, the foundation concrete will be poured in place. Usually, the anchor bolts as well as the structural hold-downs can be found on the concrete. After the concrete has set, the forms can now be uncovered and the excavation can be hand back-filled.

Related Articles: